the easygreen sprouter

The Easygreen sprouter offers truly advanced sprouting for great results, each machine comes complete with Mist Generator, timer, 5 cartridges, owner's manual, collection pan, and drain tube. Once set up just add water and sprouts for excellent results!

The Easygreen works by holding water in a reservoir at the rear to which you can add nutrients giving a true soil free hydroponics growing environment. Air flow through the machine is also filtered to deliver more consistent crop success.

Irrigation and misting systems keep a moist yet mould free growing enviroment with cycles set by the user using a timer

A truly hydroponic sprouter, the easygreen allows the use of nutrient dense fluids to grow from.

This image shows a full tray of wheatgrass grown in the easygreen in a soiless environment!

If you prefer the Easygreen can be used with soil.

Fresh water means great sprouts, as they are over 70% water themselves, the Easygreen uses fresh water for irrigation as well as misting then drains the water out, flushing toxins away.

Control means good results, the Easygreen comes with a timer, similar to a central heating timer that allows you to cycle the unit on and off as many as 96 times in a 24 hour period. We have found that about 4 runs a day is sufficient, but this control allows optimum results no matter what climate you are sprouting in.

This images shows the standard Easygreen set up including the 5 trays and timer.

At the back of the machine you can see the water reservoir and mist generator.

The green panel to the rear is the water level indicator